ASCT로고
eISSN 2288-6559
Table. 1.

Roughness values of samples.

RMS roughness (nm)
Al/Cr/Steel (as-deposited) 45
Al/Cr/Steel (annealed at 150 °C) 49.2
Al/Cr/Steel (annealed at 350 °C) 46.2
Al/Cr/Steel (annealed at 550 °C) 258.1
Cr/Al/Steel (as-deposited) 53.8
Cr/Al/Steel (annealed at 150 °C) 44.5
Cr/Al/Steel (annealed at 350 °C) ^49.1
Cr/Al/Steel (annealed at 550 °C) 58.9
Steel substrate 11.4
Applied Science and Convergence Technology 2021;30:146~151 https://doi.org/10.5757/ASCT.2021.30.5.146
© Appl. Sci. Converg. Technol.

Copyright © The Korean Vacuum Society. All Rights Reserved. / Powered by INFOrang Co., Ltd